Shenzhen KHJ
UV389G is a high performance product coating UV adhesive on the surface of polyester. It has high initial peeling strength. Low adhesion after UV irradiation and no residue after peeling off.
UV389G is a high performance product coating UV adhesive on the surface of polyester. It has high initial peeling strength. Low adhesion after UV irradiation and no residue after peeling off.
● High initial viscosity.
● Low viscosity after UV curing, easy to separate.
● Wafer, component, glass cutting and grinding process cutting.
● 3D glass bonding process, component packaging transfer.
● Soft lithium battery protection, metal and anti-static protection.
Item | Typical Value | ||
Imperial | Metric | ||
Backing | 3.0mil | 0.075mm | |
Total Thickness | 3.8±0.2mil | 0.095±0.005mm | |
Peeling strength | Before UV | 1.8~5.7lbs/in | 8~10N/25mm |
After UV | 0.11~0.36lbs/in | 0.05~0.15N/25mm | |
Tensile Strength | ≥57.13lbs/in | ≥10(KN/M) | |
Elongation | ≥120% | ≥120% | |
UV Gelation energy( wave length 365mm) | ≥200mJ/cm2 | ≥200mJ/cm2 |
Storage
● Store under normal conditions of 10-30℃ and 40-70% R.H, out of direct sunlight.
● Shelf life:12 months from the date of manufacture when stored in initial packing.
Notes
● Surface should be clean, dry, free of dust, oil or other contaminants.
● Proper pressure required by roller, hand or press when applying.
● Avoid repeat sticking to prevent adhesion decrease.
Precaution Reminder
Please be advised that this technical data sheet is written based on our lab tests and experience only. Customer is responsible to determine the suitability of the product meets intended application requirements before approved for use.
enquiry form:
enquiry product:
You have no items to require
enquiry form:
enquiry product:
You have no items to require